Usb 1-1: device not accepting address 2, error -110 and still messages like these appear.įor the Belkin usb-wifi -adapter usb 1-1: new high-speed USB device number 2 using ci_hdrc I regenerated the Debian image from the TE0720 - /os/petalinx - directory with the "mkdebian.sh"-file and of course configured the kernel, set SD-boot etc. Usb usb1-port1: unable to enumerate USB device Usb 1-1: device not accepting address 5, error -110 Usb 1-1: new high-speed USB device number 5 using ci_hdrc Usb 1-1: device not accepting address 4, error -110 Usb 1-1: new high-speed USB device number 4 using ci_hdrc Usb 1-1: new high-speed USB device number 3 using ci_hdrc Using the reference design prebuilt BOOT.bin and image.ub it always states messages similar to this when attaching USB devices (mass storage, wifi dongle etc.): Had to reboot a few times till the network-manager symbol came up on the top right XFCE-Desktop and i were able to connect. So after Boot-up and "startx" I got it somehow running by following: (Beside many other options i checked the RTL8192CU-Firmware for my Belkin N300 F7D2102)Ĭreated the SDK-Project with the CMD-Script and created the "BOOT-bin"-image with prebuilt fsbl, prebuilt BIT-File and the uboot.elf from the Petalinux-Projekt.Ĭreated the SD-Card with the Win32-Tool and Debian as the Rootfs.Ĭopied the created kernel-image.ub and the prebuilt uboot.rgba on the first partition. I configured the kernel according to the links above with the Petalinux-Projekt from Zynqberrydemo2/os/petalinux. I gave it a new try, Vivado, SDK, Petalinux all 2017.1. Wifi ist working! Although i am not pretty sure why and how. Now after Bootup i cant get into Desktop-Debian with the command 'startx' anymore.ĭid I miss something ? btw, I also tried to use the petalinux-project in "zynqberrydemo2/os/petalinux" which failed aswell. Nothing else changed on the SD-Card/FPGA-Flash. hdf-File is from zynqberrydemo2/prebuilt/hardware/te_0726_m/Īfter successfull 'petalinux-build' i replaced the new 'image.ub' with the file on the SD-Card. So i created a new petalinux-project (2017.1) and choose the related drivers in 'petalinux-config -c kernel' like here Therefore I have to reconfigure the kernel and add some drivers. Now i want to add a Wifi USB Stick(TP-Link TL_WN823N with RTL8192CU) to the running Debian System. I managed to get the Debian up and running on the Zynqberry TE0726-03m according to the short Instructions. Also, note that the exact Bluetooth services you can use will be determined by the services offered by the Apple Bluetooth stack.PetaLinux 2017.1 (Virtualbox) on Ubuntu 16.04 All you need to do is plug it in and you should be able to use Bluetooth. Yes, as long as the Apple computer in question is running OS X® 10.2 or later, then the necessary Bluetooth drivers are built into the operating system. To do this, click here.Ĭan I use the Belkin Bluetooth adapters on my Apple® computer running Mac OS® ? If you encounter any issues, install the latest drivers from the chipset manufacturer. Windows 7 should automatically recognize the device and install the necessary drivers and software. Simply plug the device into a spare USB slot. Most Belkin Bluetooth® USB adapters install automatically without any extra software on Windows 7. For instructions on how to update your Belkin device, click here. Locate and unzip it once downloaded to extract the driver files. IMPORTANT: This download is a ZIP file type. Download OS Compatibility: Windows 2000, Windows XP 32-bit, Windows Vista® 32-bit Size: 209 MB
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |